LENS CHANGING INSTRUCTIONS
Lens changing instructions for the Unleashed, Crush, Vector, and Tech Intuder and Departure style sunglasses:
With the sunglasses facing you, grasp inner part of lens nearest the nose piece.
Push toward the outer part of the lens and down with your thumb
You may need to use a little pressure. Do not be afraid of breaking the lenses or glasses.
Lens should slide out.
Repeat the same for the opposite lens.
To reinsert lens, slide outer part of lens, the side farthest away from the nose, into groove.
Slide lens up groove until it "clicks" into place.
Lens Changing Instructions for the Pro Stealth Style Sunglasses:
Close arms.
From the rear of the sunglasses, push the lens out.
To reinsert lens, close arms.
Slide lens from the outer part of the frame toward the nose.
From the front of the sunglasses, with the arms folded, press on the lens until it "clicks" into place.
Keep in mind, this lens is a "Floating Lens". It will not go entirely into the grooves in the frame. the bottom part of the lens will be slightly raised over the frame.
Lens Changing Instructions for the Tech Evolution Style Sunglasses:
Close arms.
From the rear of the sunglasses, push the lens out at the top.
To reinsert lens, close arms.
Center the lens from the outer part of the frame.
From the front of the sunglasses, with the arms folded, press on the lens until it "clicks" into place.
Keep in mind, this lens is a "Floating Lens". It will not go entirely into the grooves in the frame. the bottom part of the lens will be slightly raised over the frame.
<-Back
